Payne 5 ton 13 seer Heat Pump and 80% AFUE 110,000 btu gas furnace

To check availability, call us at 1-800-360-1569 or visit our online store.



Payne Complete split System AC Gas 80%20(2) Payne 5 ton 13 seer Heat Pump and 80% AFUE 110,000 btu gas furnaceManufacturer: PAYNE

Model #: PH13NB060, PG8MAA066110, CNPVP6024ALA

Price: $3539.00

Payne Complete split Heat Pump 5 ton 13 SEER and 80% AFUE 110,000 btu Gas Furnace 

This Package Includes: 5 ton Heat Pump, 80% AFUE 110,000 btu Gas Furnace, and matching coil.

 Heat Pump Condenser

 Payne 5 ton 13 seer Heat Pump and 80% AFUE 110,000 btu gas furnace

Warm Up with Payne

The PH13NA unit delivers comfort with 13 SEER (Seasonal Energy Efficiency Ratio) cooling and 7.7 HSPF (Heating Seasonal Performance Factor) heating efficiency. It’s equipped with our standard grille for attractive, durable coil protection.

Efficient, Environmentally Sound

If your concern over environmental issues is on equal footing with your desire to be comfortable at home, the PH13NA heat pump is offered with chlorine-free, R-410A refrigerant. Attractive, designed for minimal effect on the Earth’s ozone layer and built to last, this is a smooth-running, energy-saving heating and cooling machine. This model incorporates the EPA-approved and industry accepted R-410A refrigerant, the environmentally sound alternative to R-22.

DOCUMENTS:

  1. DOWNLOAD THE OWNER’S MANUAL
  2. DOWNLOAD TECHNICAL LITERATURE
  3. CONSUMER BROCHURE – ENGLISH
  4. CONSUMER BROCHURE – SPANISH

 

 

80 % Gas Furnace

 Payne 5 ton 13 seer Heat Pump and 80% AFUE 110,000 btu gas furnace

  • PSC Motor
  • 110,000 Input
  • 89,000 Output

4 Flue” 

21  x 33 5/16 W x H

Warm Up with Payne

This 80% AFUE (Annual Fuel Utilization Efficiency) furnace easily saves money on operation compared to older, less efficient models while delivering years of reliable performance backed by Payne.

Documents:
 
DOWNLOAD TECHNICAL LITERATURE.
CONSUMER BROCHURE – ENGLISH.
CONSUMER BROCHURE – SPANISH 

 Coil

 

 

 

 

  • evap 3 Payne 5 ton 13 seer Heat Pump and 80% AFUE 110,000 btu gas furnace 

     

  • Enhanced Performance with Payne® Indoor Coils

    An air conditioning system consists of more than the unit that sits out in your flowerbed. It includes an indoor section that is vital to cooling performance. A Payne evaporator coil is a great fit for your Payne air conditioner or heat pump because it is built to the same high engineering standards. It’s designed to match both technically and physically to optimize the performance of your air conditioner or heat pump system.

    Payne evaporator coils are available in cased or uncased models and include A coils as well as N coils. We even have an N coil designed for use in manufactured housing units.

    Document:

    Brochure CNPVP

    10 Year Warranty with Factory Registration


    If you’re concerned about the environment, then you’ve probably thought about making the switch from a traditional air conditioning system to an energy efficient heat pump that uses R410A ozone-friendly refrigerant. R410A and energy efficient heat pumps can reduce harmful emissions and lower your carbon footprint. However, on the very coldest days, an energy efficient heat pump may not be enough to heat your house like you want it. For that you need a gas furnace to deliver time-tested performance. To get both, you need Payne’s 5 ton Complete Dual Fuel System that takes advantage of the versatility of their 13 SEER heat pump with the power of their 80% AFUE 110,000 BTU gas furnace.

    As many Payne customers find, there is a lot to like about a Payne Complete Dual Fuel System. In the 5 ton package, Payne includes a 13 SEER heat pump optimized for savings and performance with a galvanized steel cabinet, high efficiency compressor, durable fan motor, easy access panels, copper tube and aluminum fin coil, exterior service valves and, of course, R410A eco-friendly refrigerant capability. The 80% AFUE gas furnace comes standard with the ability to use either propane or natural gas fuel, hot surface ignition, self test function, LED diagnostics, electronic control board, and 4-way Multipoise design. To optimize the heat pump and gas furnace even more, Payne’s interior evaporator coil is specifically engineered to function effectively with both systems.

    Still, as good as those parts are, they can’t stand up to the value Payne delivers with a 10 year limited warranty on the parts and the heat pump compressor. A full decade of warranty protection is an industry-leading standard other companies can’t or won’t meet.

     

     

     

  •  

     



    To check availability, call us at 1-800-360-1569 or visit our online store.


    Geothermal Heat Pump

    Leave a Reply

    Call us today at 1-800-360-1569