Bryant Complete Split System Heat Pump 213B Legacy 3 Ton. Single Stage 15.00 SEER 8.7 HSPF

To check availability, call us at 1-800-360-1569 or visit our online store.

Bryant Complete Split System Heat Pump Legacy Bryant Complete Split System Heat Pump 213B Legacy 3 Ton. Single Stage 15.00 SEER 8.7 HSPFManufacturer: BRYANT

Model #: 213BNA036, FX4DNF043T00

Price: $3478.00

Bryant Complete Split System Heat Pump 213B Legacy 3 Ton. Single Stage 15.00 SEER 8.7 HSPF

Legacy® System Heat Pump

Cool and Heat Your Home with High Efficiency and High Value

The Legacy heat pump provides low-cost all-season comfort, cooling your home in summer with its up to 16 SEER rating, then reversing when temperatures drop for low-cost electric heat. It adds up to year-round value.

Models: 213B

Key Features

  • Up to 16.0 SEER and 9.0 HSPF
  • Sound as low as 69 dB
  • DuraGuard™ protection package
  • Steel louvered coil guard
  • Environmentally-sound Puron® refrigerant
  • 10-year parts limited warranty upon registration (213B) 


Efficiency 13 SEER, Up to 14 SEER (Up to 14.5 SEER, except 5-ton)/Up to 8.2 HSPF

10-year parts limited warranty upon registration



Quiet Level As low as 72 dB


Controls Supported Thermidistat™, Standard Thermostats


Refrigerant Puron® refrigerant
Compressor Scroll
Heating Capacity (tons) 1.5 – 5
Cooling Capacity (tons) 1.5 – 5


Protection DuraGuard Protection Package
Construction Galvanized steel
Paint Powder-coated
Coil Guard Dense Wire Coil Guard Available
Cabinet Screws Color matched

 Documents:  Owner’s Manual   Consumer Brochure   Warranty Card

Legacy Series Air Handler

Fan Coils for the Ultimate in Cooling and Heating Efficiency

Evolution® Fan Coils are an easy way to cut cooling costs by up to 16% and heating costs up to 10%. They also feature variable speed control, corrosion-resistant plating and environmentally-friendly Puron® refrigerant.

The FX4D fan coils combine the proven technology of Bryant fan coil units with Puron®, the environmentally sound refrigerant. These fan coils are loaded with popular features. Factory–installed, refrigerant–specific thermostatic expansion valves (TXV) are standard with these fan coil designs. The designs feature contoured condensate pans with rugged, drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The
lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.

Standard features include grooved copper tubing and louvered aluminum fins. The large face areas of the refrigerant coils provide superior efficiency for high SEER and HSPF performance. Coil circuiting has also been updated to make the most of all Bryant heat pumps and air conditioners. Also units come with solid state fan controls, 1–in(25mm) thick insulation with R–value of 4.2, multi–speed motors, and fully–wettable coils. Units can accommodate factory– and/or field–installed heaters from 3 to 30 kW.

Models: FX4D

Key Features

 High efficiency ECM (electronic commutating motor) X–13 motors — all sizes.
 Integrated motor controls have replaced integrated circuit board.
 Large, grooved tube, louvered fin coils.
 Efficient, quiet, time–tested blower housings and diffusers.
 Sturdy, drainable condensate pans.
 Cabinet construction features innovations designed to prevent cabinet sweating.
 Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
 Super–thick R–4.2 insulation with vapor barrier.
 Pre–painted galvanized steel cabinet (taupe metallic).
 Cabinet design meets stringent regulations for 2% cabinet leakage rate when tested at 1.0 inches static pressure.
 Installation–flexible, multipoise units.
 Horizontal hanging provisions on cabinet.
 No tools required to service filter.
 Factory–supplied, cleanable and reusable filter.
 Newly improved filter rack area filter door insulation added for improved air seal.
 Factory–installed heater packages available (5– through 15–kW).
 3– through 30–kW accessory heaters — field installed.
 Factory–supplied power plug.
 Easy plug–in provisions for heater installation.
 Entry options for high and low voltage wiring hook–up.
 Simple, 5–amp blade fuse (and a spare) to protect 40 VA transformer.
 Easy coil inspection (removable, snap–in plug on A–coil models).
 Leak–preventing sweat connections.
 Modular cabinets available on 037 through 061 sizes.
 Designed for manufactured housing applications.

  • 10-year parts limited warranty upon registration; Tin plated coil 10-year parts limited warranty; Copper coil 5-year parts limited warranty

Brochures:  Consumer Brochure   Warranty Card   Warranty Card 2

To check availability, call us at 1-800-360-1569 or visit our online store.

Geothermal Heat Pump

Leave a Reply

Call us today at 1-800-360-1569